BurnOutPC.com

Packaging

The SunbeamTech HTPC Acrylic case comes in a thin packaging, with all the bits packed together safely. Each part is protected by a protective cover so you won’t end up with a scratched panel. Especially with see through cases you just don’t want any imperfections or scratches because you’ll end up seeing them when lights are inside the chassis, such as the led fans that are included with the case. The SunbeamTech Acrylic HTPC has everything you need to build this chassis. It comes with a lot of small bags full of screws and bits. Also included are a pair of gloves and 4 blue led fans. I chose not to use the gloves because it was much harder to do the installation with, than without the gloves. You’ll risk adding lots of fingerprints to the panels but you’ll be able to remove those once the installation is done.

First Process

This is not like your typical chassis review, where I show you the sides, the inside and so on. In order for me to do so I had to build the thing first.

I first had to check whether I had everything. Once you are done preparation it’s time to start the built process. The manual Sunbeamtech included is not too difficult to read, but the sheer amount of bits and pieces that are included with this package is overwhelming. Once you get the hang of it, it’s a piece of cake to build the chassis.